The Natoma Roll Rim cast iron claw foot bathtub - 4-1/2 feet long. This traditional claw foot bath tub is made from cast iron and then enameled with porcelain just like the antique ones are. There is beautiful attention to detail on the claw feet. Select from the following finish options on the feet: polished chrome, matte nickel, polished nickel, supercoat brass, or oil rubbed bronze.The tub is drilled with 3-3/8" on center faucet holes to accommodate a standard tub-wall mount faucet. Warranteed to be free from manufacturer's defects within 5 years from date of purchase. In most cases, on-site repair of tub can be accomplished to minimize inconvenience, in the case of damage. Please contact us immediately if there is damage during transit. FREE SHIPPING to 48 continental US states. includes freight, crating, residential delivery and liftgate curbside delivery only. Please allow 10 - 14 days for tub to ship.
Since 1972, Strom Plumbing has specialized in authentic reproduction plumbing merchandise.
Each fixture is a reflection of their relentless pursuit of quality and improvement. Strom faucets are constructed with high quality, low lead brass. They meet all current regulations with regard to lead composition. Each item is individually assembled and tested in the United States. Strom finishes include Chrome, Matte Nickel, Polished Nickel, Supercoated Brass, Oil Rubbed Bronze. The Oil Rubbed Bronze ("non-living") is a fragile finish that must be inspected prior to installation and are not warranted further. Supercoat items should be wiped gently with a soft cloth after each use. Plumber's putty should not be used for installation. Use of plumber's putty, detergents or abrasive cleaners will void the warranty of the finish as they may cause deterioration of the coating. We recommend a bead of waterproof silicone where putty is needed. All faucets will be shipped with 1/4 turn ceramic valves. Strom’s 1/4 turn ceramic cartridge uses 2 ceramic disks that rotate to open and close the valve, minimizing mechanical wear. Thermostatic valves control the output of the faucet and keep the temperature constant.
- Overall Length: 54.5”
- Overall Width: 30.5”
- Height: 24”
- Faucet Holes Center to Center: 3-3/8”
- Bottom of Tub to Floor: 5.3”
- Overflow Height to Bottom of Tub: 12.5”
- Seat Area: 30” x 17”
Available Finishes for the Tub Feet:
- Polished Brass
- Polished Nickel
- Matte Nickel
- Polished Chrome
- Oil Rubbed Bronze
This is a non-stock item that generally ships out in 10-14 days. Rush shipping is available for some items, and items can also be drop shipped directly from the manufacturer’s CA warehouse for an additional $10. Please call or email us for information on shipping costs and lead times to your location. International shipping is available for this item.
All Strom items are warranted to be free of manufacturing and finish defects for a period of 5 years from date of purchase, when properly installed by a qualified, licensed plumber. This warranty covers replacement of defective parts, not of complete product, unless deemed necessary by a customer service representative. The warranty does not extend to labor charges or air freight charges when repair or replacement of the item is needed. The warranty only applies to interior installations. Shower Curtains are not warranted.
Ceramic Faucet Handle Warranty
All Strom ceramic faucet handles are warranted for 5 years from date of purchase. Any ceramic handle developing cracks or chips will be promptly replaced, as a cracked or broken handle may result in personal injury.
Lifetime Supercoat Brass Warranty
For the many customers that desire a beautiful polished brass finish and want to avoid the necessity of polishing, we have developed our Supercoat Brass protective finish. Our Supercoating is a 2 part epoxy, applied electrostatically, and baked on to insure a lasting shine. It is absolutely guaranteed for as long as the original purchaser owns their home and proper maintenance instructions are followed. The product must be returned to our factory for re-coating. We will re-coat, not replace the product if a defect of the Supercoat finish occurs.
Strom tubs are warranted to be free of manufacturing and finish defects for a period of 5 years from date of purchase, when properly installed by a qualified, licensed plumber. In most cases on-site repair of the tub will be accomplished, minimizing the inconvenience to the customer.